1100 - 1630    

Exhibit Kick-off & Poster Technical Interchange
(Light Refreshments)

Poster presentations include:
(Listed alphabetically by author)

A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

“Rapid Experimentation System for Investigating Nanotube Growth Mechanisms”
Lt. Roberto Acosta, AFRL

“CONTACT: NanoMaterials and Devices for Defense Applications”
Dr. Jack Agee, Rice University

“De-salination and Water Purification using Carbon Nano Tubes”
Dr. Iffat Allam, Cromzo Inc.

“Polycarbonate Composite Fibers Based on Carbon Nano Tubes”
Dr. Iffat Allam, Cromzo Inc.

“Nonlinear Conduction in Gold Nanoclusters: Experiment and Modeling”
Dr. Mario Ancora, NRL

“Nanometric Inks for Identification and Sensing of Improvised Explosives”
Dr. Allen Apblett, Oklahoma State University

Return to top

“Atmospheric Pressure Epitaxial Graphene on SiC”
Dr. John Boeckl, AFRL

“Nanowire Data Converters”
Dr. Albert Bogozi, AFRL

“Carbon Nanotube Coatings for ESD, Photovoltaics, and EMI Shielding”
Dr. David Britz, Eikos, Inc.

“Utilizing Polymer Nanocomposites in the Fabrication of Bio-inspired Vibration Sensors”
Dr. Lawrence Brott, AFRL

“NSF NSEC Center for High-rate Nanomanufacturing”
Prof. Ahmed Busnaina, NSF Nanoscale Science and Engineering Center of High-Rate Nanomanufacturing. Presented by Dave Lash, Northeastern University

Return to top

C

“Multifunctional Hybrid NanoMaterials for Extreme Environments”
Dr. Ming-Yung Chen, AFRL. Presented by Ryan Justice, AFRL

“Super-hydrophobic Nano-composite Films”
Dr. Jeff Chinn, Integrated Surface Technologies

“Trimodal Aluminum Composites for Survivability”
Dr. Kyu Cho, ARL

“Porous Silicon as Nano-material for Energy Conversion”
Dr. Marc Christophersen, NRL

“Quantum Dots and Quantum Dot Light Emitting Diodes for DoD Applications”
Dr. Seth Coe-Sullivan, QD Vision, Inc.

“Gold Nanoparticles for Optical Limiting Applications”
Dr. Thomas Cooper, AFRL. Presented by Augustine Urbus, AFRL

Return to top

D

“Silver Nanowires for Enhanced Electrical and Thermal Conductivity in Thin Films and Composites”
Dr. Thomas Darlington, nanoComposix

Return to top

“Bionanocomposite Synthesis and Design: Characterizing the Bio-inorganic Interface in Biomineralizing Peptides”
Dr. D. Matthew Eby, AFRL

“Boron Carbide Based Nanocomposites for Armor Applications”
Dr. Baburaj Eranezhuth, Clarkson Aerospace Corporation

Return to top

F

“Demonstration of an Acid Spun Single Wall Nanotube Fiber Cathode”
Dr. Steven Fairchild, AFRL

“Broadband Cyclic Sommerfeld Resonance in Nanorods for Defense Applications”
Dr. Simin Feng, NAWC WD

Return to top

G

“Durable Superhydrophobic Nanoparticle Coatings”
Prof. Di Gao, University of Pittsburgh

“Rapid Detection of Infectious Agents Enabled by Nanotechnology”
Prof. Di Gao, University of Pittsburgh

“Magnetodielectric Nanocomposite Substrates for Antenna Applications”
Dr. James Garrett, Luna Innovations, Inc.

“Atmospheric Pressure Plasma Liquid Deposition for Surface Modification and Functional Nano-Coatings”
Dr. Arjan Giaya, Triton Systems

Return to top

“Bulk Nanostructured Materials for Armor and Anti-armor Applications”
Dr. Chris Haines, Army ARDEC

“Corrosion Inhibition of Carbon Nanotube Nanocomposites”
Prof. Issifu Harruna, Clark Atlanta University

“The Fabrication of Nano Composites by Mechanical Processing”
Dr. C.C. Huang, Hosokawa Micron International, Inc.

“Controlled Growth and Device Implementation of III-V-based Quantum Dots and Nanopillars on Patterned GaAs Substrates by MOCVD”
Prof. Diana Huffaker, University of California, Los Angeles

Return to top

“Elastomeric Nanocomposite Barrier Materials for Submarine Missile Fly-through Covers”
Dr. David Irvin, Systems & Materials Research Corporation

Return to top

“Conductive Biohybrid NanoMaterials for Direct Electron Transfer”
Dr. Glenn Johnson, AFRL

“Highly Dispersed Nanosilica–epoxy Resins with Enhanced Mechanical Properties”
Dr. Ryan Justice, AFRL

Return to top

“Adhesive Tape Based on Carbon Nanotubes”
Mr. Ali Kashani, Atlas Nanotechnologies, Inc.

“Poly(2-methoxystyrene) Based Functional Nanostructures and Nanotopographies to Control Material-cell Interactions”
Prof. Ishrat Khan, Clark Atlanta University

“Hybrid Material Platforms for Energy Conversion Devices: Nanometer-scale Group III-V Compound Semiconductors Integrated on Micrometer-scale Silicon”
Prof. Nobihiko Kobayashi, University of California, Santa Cruz. Presented by Tiziana Bond, Lawrence Livermore National Laboratory

“Photovoltaics Based on Semiconductor Nanocrystals in Amorphous Silicon p-i-n Junction”
Dr. Sergei Krivoshlykov, ANTEOS, Inc.

“Polymer/Carbon Nanotube Composite Films and Fibers”
Prof. Satish Kumar, Georgia Institute of Technology

Return to top

“Construction of a Novel High Functional Density Photo-electronic Material by Encapsulation of Photosynthetic Reaction Center Proteins in Carbon Nanotube Arrayed Electrode”
Dr. Nikolai Lebedev, NRL

“Uses of Nano-structured Chemicals in Continuous Carbon-fiber Reinforced Polyimide Composites”
Prof. Andre Lee, Michigan State University

“Quantitative Instrumented AFM Nanoindenting for Mechanical Characterization at the Nanoscale”
Dr. Jason Li, Asylum Research

“High Concentration Nanotube Composites Utilizing Preformed Nanotube Sheets and Buckypapers: Bridge the Gaps between Lab Research to Engineering Applications”
Prof. Richard Liang, Florida State University

Return to top

M

“Dynamically Tuned Vanadium Dioxide Metamaterials"
Dr. James Ma, Northrop Grumman Aerospace Systems. Presented by Seth Taylor, Nortrhrop Grumman Aerospace Systems

“Thermoelectric Applications of n/p Doped Multiwall Carbon Nanotube Sheets”
Ms. Jennifer Mann, Nanocomp Technologies. Presented by David Lashmore, Nanocomp Technologies

“Carbon Nanotube Threads, Yarns, and Ribbons for Wireless, Power and Sensor Applications”
Dr. David Mast, University of Cincinnati

“Nanometric Molybdenum and Tungsten Hydrogen Bronze Reagents for the Neutralization of Explosives”
Dr. Nicholas Materer, Oklahoma State University

“Development and Simulation of Multi-enzyme Cascades for Biofuel Cells”
Prof. Shelley Minteer, Saint Louis University

“Towards the Development of Flow-through Electrodes for Biofuel Cells: Chitosan Scaffolds and Novel Characterization Tools”
Prof. Shelley Minteer, Saint Louis University

“An Atomic Structural Model for Metallic Glasses”
Dr. Daniel Miracle, AFRL

Return to top

N

“Biofunctionalized CNT-FETs for Sensing Applications”
Dr. Rajesh Naik, AFRL

“Dispersion and Enrichment of Single Wall Carbon Nanotubes using DNA”
Dr. Rajesh Naik, AFRL

“Multi-walled Carbon Nanotube Ultracapacitor Electrodes Grown”
Dr. Darrell Niemann, BINRDI, The Advanced Studies Laboratories

Return to top

“Delivery and Degradation: Two Different Nanoparticle Exposure Studies”
Dr. Steven Oldenburg, nanoComposix

“Two Color Midinfrared Optically Pumped Semiconductor Lasers”
Dr. Andrew Ongstad, AFRL

Return to top

P

“Nanoparticle/Polymer Hybrid Materials”
Prof. So-Jung Park, University of Pennsylvania

“Electromechanical Characterization of Carbon Nanotubes Grown on Carbon Fiber”
Dr. Steven Patton, AFRL. Presented by Ryan Justice, AFRL

“Fourier Transmission Infrared Studies of Semiconductor Nanoparticles for Photodetoxification of Organic Compounds”
Prof. Dilip Paul, Pittsburgh State University

“Carbon Nanotube Chemsensors and Transistors”
Dr. F. Keith Perkins, NRL

“Antimicrobial Surfaces with Bound Peptide/Protein Analogs”
Dr. Lars Piehler, ARL

“In-situ Spectroscopic Studies of Benzenethiol on Pt and Pd Nanostructured Electrodes”
Dr. Michael Pomfret, NRL

Return to top

R

“Development of NanoMaterials at SRI’s Materials Research Laboratory”
Dr. Padmanabha Ravilisetty, SRI International

“Solid Oxide Fuel Cells Produced through Advanced Direct-write Techniques”
Dr. Thomas Reitz, AFRL

“Nanolaminate for DoD Imaging Applications”
Dr. Joseph Roberts, NAWC WD

“Engineered Metamaterials for Multi-field Sensing Control and Energy Conversion”
Prof. Massimo Ruzzene, Georgia Institute of Technology

Return to top

S

“Phononic Crystals: From Sound Isolation to Heat Extraction”
Dr. Jonathan Singer, Massachusetts Institute of Technology

“Nanotechnology to Enhance Electrochemical-mechanical Multifunctionality in Structural Battery Materials”
Dr. James Snyder, ARL

“Efficient Synthesis of NanoMaterials by Microwave-mediated Hydrothermal Method”
Dr. Alexander Stadler, Anton Paar. Presented by Michael Canavan, Anton Paar

“Nanoporous Silicon: Applications in Batteries, Energetics and Biotechnology”
Dr. Shanthi Subramanian, Vesta Sciences

Return to top

T

“In-situ Nanocomposite Synthesis: Arylcarbonylation and Grafting of Primary Diamond Nanoparticles with a Poly(ether-ketone) in Polyphosphoric Acid”
Dr. Loon-Seng Tan, AFRL

“Endohedral Fullerenes for Improved Organic Solar Cell Efficiencies”
Dr. Carey Tanner, Luna Innovations Incorporated

“AFRL/RX Applied Metamaterials”
Dr. Katie Thorp, AFRL

“Embedded CNT Heaters”
Mr. Corey Timoney, Nanocomp Technologies. Presented by David Lashmore, Nanocomp Technologies

“Super Lightweight Fused Carbon Nanotube Structure”
Prof. Albert To, University of Pittsburgh

“Perfect Wave Absorption with a One-dimensional Phononic Crystal Structure”
Prof. Albert To, University of Pittsburgh

“Neat SWNT and Hybrid Composite Fibers”
Prof. James Tour, Rice University. Presented by Jack Agee, Rice University

“Progress in Carbon Nanotube and Semiconducting Nanowire Synthesis”
Dr. Yi Tu, First Nano, a Division of CVD Equipment Corporation

Return to top

V

“Complex Metal Nanostructures: Colloidal Strategies to Optimize the Heterostructure for Optical and Catalytic Performance”
Dr. Richard Vaia, AFRL

“Morphology Characterization of Polymer Nanocomposites using Electron Tomography and Analytical TEM”
Dr. Richard Vaia, AFRL

“Nanostructural Evolution during Emission CsI Coated Carbon Fiber Cathodes”
Dr. Richard Vaia, AFRL

“Low-temperature Synthesis of Vertically Aligned Carbon Nanotubes”
Dr. Alex Vasenkov, CFDRC

Return to top

W

“Polymer-ceramic Nanocomposites for High Power Capacitors”
Dr. Qingwu Wang, Agiltron, Inc.

“Enhancing the Electrical Properties of Carbon Nanotube Wires and Ribbon Connectors”
Dr. Brian White, Nanocomp Technologies. Presented by David Lashmore, Nanocomp Technologies

“Reactive Self-Decontaminating Coating Systems”
Dr. James Wynne, NRL

Return to top

Z

“Consolidation of Nanostructured Particulate Materials Using Instrumented-HIP,”
Dr. Tony Zahrah, MATSYS, Incorporated

Return to top